Overview

 

The CD224Exx models are internal 24X CDROM drives for a notebook PC application.

Summary:

Model:


Status:    

Speed:     

Interface:  
Factory Default Configuration:

CD224E900
CD224EA93
CD224EB93

Current

24X

IDE/ATAPI

CD224EA/EB:

The setting to Master or Slave is determined by the CSEL signal on pin-47 in the interface connector.

If the CSEL signal is at low level, the drive is set to Slave.

If the CSEL signal is at high level, the drive is set to Master.

 

CD224E900:

You may configure this drive as Master/Slave through a block of DIP switches which are found in the bottom side of the drive. The following table provides the settings configuration:

Setting

S1

S2

CSEL

OFF

ON

Master

ON

OFF

Slave

OFF

OFF

Single

ON

ON

NOTE: This drive is purchased by system integrators that design their own systems.  If you are looking for a replacement drive or are thinking of adding this drive to your system, please contact the manufacturer of your system to make sure that the system has the proper connections and is electrically and physically  compatible.