You can share a printer that is connected directly to your Vendotto and the other printers on your network by using your Vendotto.
The printers that are on your network but that are not connected directly to your server are called remote printers.
Your Vendotto allows you to set up three remote printers. After the setup, a shortcut icon will be created on your Vendotto. With a click of the icon, you will be able to use the remote printers similarly to your local printer.
To refer to a remote printer you set up, go to [My Computer] - [Control Panel] or go through [Network Neighborhood] or [My Network Places] if you use Windows 98/NT4.0 or Windows Me/2000/XP.
Click [Modify Printer Server Setup] after you enter each value.
(1) Delete Job
Click the button to delete all the print jobs that are stored in the spool space.
(2) Share Name
Specify a share name for the printer connected to your Vendotto.
You can find the printer by referring to your Vendotto on the network that shows the name specified here.
*You need to type the share name specified here for the port name when you set up print-sharing on your client computers.
*You cannot specify the same name as any user name or the share name of any folder on the network.
*Enter a share name with up to 12 alphanumeric characters. No symbols or special characters are allowed.
Default: printer
To set up printers that are currently unconnected to your Vendotto as remote network printers 0, 1 and 2, follow the instruction below.
(3) Share Name
Enter a share name for the remote printer with up to 12 alphanumeric characters.
*No symbols or special characters are allowed.
Default: blank
(4) Remote Host
Enter the IP address or the name corresponding to the IP address for the printer connected to your network.
*No symbols or special characters are allowed.
*It may take time to initiate time-out process if you enter an incorrect IP address.
Default: blank
(5) Remote Printer Name
Enter a name that identifies the printer connected to your network using up to 12 alphanumeric characters.
*No symbols or special characters are allowed.
Default: blank
(6) Query Printer Server State
Click the button to check to see how the printer job is going.
*The current job state is displayed on top of the setup parameter screen.